Milling instead of grinding – smooth surfaces with maximum economic efficiency
10. April 2025
Mirroworx® processes Toolox 44
Processing task in Aluminum
| Tool | 2 80 384 |
| dc (nominal diameter) | 80 mm | 3.1496 inch |
| Arbor | 50 27 710 |
| Overhang | 100 mm | 3.937 inch |
| Cooling | with cooling lubricant |
| Indexable insert | 04 84 835 |
Technical data | metric sizes
| Vc (cutting speed) | 250 m/min |
| n (revolutions) | 1000 1/min |
| fz (feed per tooth) | 1 mm |
| Vf (feed rate) | 2000 mm/min |
| ap (depth of cut) | 0,03 mm |
| ae (width of cut) | 60 mm |
| Ra (average roughnes value) | 0,03 µm |
| Rz (average surface roughness) | 0,163 µm |
Technical data | imperial sizes
| SFM (surface feet per minute) | 820.21 feet/min |
| RPM (revolutions) | 1000 RPM |
| IPT (inches per tooth) | 0.0394 inch |
| IPM (inches per minute) | 78.7401 inch/min |
| DOC (depth of cut) | 0.0012 inch |
| WOC (width of cut) | 12.3622 inch |
| Ra (average roughness value) | 1.1811 µin |
| Rz (average surface roughness) | 6.4173 µin |
