18. November 2025

Quadworx® XL processes 1.2312 48 HRC

a working steel
  • Customer case studies
  • Milling cutter bodies
  • Quadworx® XL
  • Hard materials
Quadworx® XL processes hard materials.

Quadworx® XL processes hard materials – High-feed milling cutter for universal use and maximum cost-effectiveness

Processing task in 1.2312 48 HRC

Tool5 52 351
dc (nominal diameter)52 mm | 2.047 inch
Arbor100 22 710
Overhang169,1 mm | 6.657 inch
Coolingwith air
Indexable insert05 51 858 HF

Technical data | metric sizes

Vc (cutting speed) 200 m/min
n (revolutions)1240 1/min
fz (feed per tooth)1 mm
Vf  (feed rate)6200 mm/min
ap (depth of cut)1,2 mm
ae (width of cut)32 mm

Technical data | imperial sizes

SFM (surface feet per minute)656.17 feet/min
RPM (revolutions)1240 RPM
IPT (inches per tooth)0.039 inch
IPM (inches per minute)244.095 inch/min
DOC (depth of cut)0.047 inch
WOC (width of cut)1.260 inch

Learn more