18. November 2025

Quadworx® XL processes 1.7147 58 HRC

a cold working steel
  • Customer case studies
  • Milling cutter bodies
  • Quadworx® XL
  • Hard materials
Quadworx® XL processes hard materials.

Quadworx® XL processes hard materials – High-feed milling cutter for universal use and maximum cost-effectiveness

Processing task in 1.7147 58 HRC

Tool6 80 351
dc (nominal diameter)80 mm | 3.149 inch
Overhang500 mm | 19.685 inch
Coolingwith water
Indexable insert05 51 896 HF

Technical data | metric sizes

Vc (cutting speed) 150 m/min
n (revolutions)600 1/min
fz (feed per tooth)1 mm
Vf  (feed rate)3600 mm/min
ap (depth of cut)1,5 mm
ae (width of cut)27,5 mm

Technical data | imperial sizes

SFM (surface feet per minute)492.13 feet/min
RPM (revolutions)600 RPM
IPT (inches per tooth)0.039 inch
IPM (inches per minute)141.732 inch/min
DOC (depth of cut)0.059 inch
WOC (width of cut)1.083 inch

Learn more