Customer case study of finishing in mould making with Spinworx®, the highly productive, time-saving milling system.
10. June 2025
Spinworx® finishes 1.2379 (62 HRC)
in mould making
Spinworx® finishes 1.2379 (62 HRC)
| Tool | DR10-025-E12-04 |
| dc (nominal diameter) | 25 mm | 0.9843 inch |
| Arbor | 50 12 710 |
| Overhang | approx. 85 mm | 3.3465 inch |
| Cooling | with air |
| Indexable insert | DR10-8C4 |
Technical data | metric sizes
| Vc (cutting speed) | 90 m/min |
| n (revoltions) | 1145 1/min |
| fz (feed per tooth) | 0,25 mm |
| Vf (feed rate) | 1145 mm/min |
| ap (depth of cut) | 0,2 mm |
| ae (width of cut) | 14 mm |
| service life | 3 h |
| end of service life | not achieved |
| machining volume | 3,21 cm3/min |
Technical data | imperial sizes
| SFM (surface feet per minute) | 295.276 feet/min |
| RPM (revoltions) | 1145 1/min |
| IPT (inches per tooth) | 0.0098 inch |
| IPM (inches per minute) | 45.0787 inch/min |
| DOC (depth of cut) | 0.0079 inch |
| WOC (width of cut) | 0.5512 inch |
| service life | 3 h |
| end of service life | not achieved |
| machining volume | 0.1959 inch3/min |
