10. June 2025

Spinworx® roughs 1.2312

in mould making
  • Customer case studies
  • Tool and mould making
  • Spinworx®
  • Milling cutter bodies
  • Hard materials
Spinworx processes hard materials

Customer case study of roughing in mould making with Spinworx®, the highly productive, time-saving milling system.

Spinworx® roughs 1.2312

ToolDR07-025-E12-06
dc (nominal diameter)25 mm | 0.9843 inch
Arbor50 12 710
Overhang90 mm | 3.5433 inch
Coolingwith air
Indexable insertDR07-8E4

 

Technical data | metric sizes

Vc (cutting speed)200 m/min
n (revoltions)2546 1/min
fz (feed per tooth)0,6 mm
Vf (feed rate)9167 mm/min
ap (depth of cut)0,6 mm
ae (width of cut)15,5 mm
service life9,6 h
end of service lifeachieved
machining volume85,26 cm3/min

 

Technical data | imperial sizes

SFM (surface feet per minute)656.168 feet/min
RPM (revoltions)2546 1/min
IPT (inches per tooth)0.0236 inch
IPM (inches per minute)360.91 inch/min
DOC (depth of cut)0.0236 inch
WOC (width of cut)0.6102 inch
service life9,6 h
end of service lifeachieved
machining volume5.2029 inch3/min

 

Learn more