10. June 2025

Spinworx® roughs 1.2738 HH

in mould making
  • Customer case studies
  • Tool and mould making
  • Spinworx®
  • Milling cutter bodies
  • Steel
The Spinworx milling system mills a component. These are premiumtools from Pokolm.

Customer case study of roughing in mould making with Spinworx®, the highly productive, time-saving milling system.

Spinworx® roughs 1.2738 HH

ToolDR10-025-E12-04
dc (nominal diameter)25 mm | 0.9843 inch
Arbor50 12 750
Overhangapprox. 80 mm | 3.1496 inch
Coolingwith air
Indexable insertDR10-8F4

 

Technical data | metric sizes

Vc (cutting speed)180 m/min
n (revoltions)2291 1/min
fz (feed per tooth)0,5 mm
Vf (feed rate)4584 mm/min
ap (depth of cut)0,7 mm
ae (width of cut)15 mm
service life6 h
end of service lifenot achieved
machining volume48,13 cm3/min

 

Technical data | imperial sizes

SFM (surface feet per minute)590.551 feet/min
RPM (revoltions)2291 1/min
IPT (inches per tooth)0.0197 inch
IPM (inches per minute)180.4724 inch/min
DOC (depth of cut)0.0276 inch
WOC (width of cut)0.5906 inch
service life6 h
end of service lifenot achieved
machining volume2.9371 inch3/min

 

Learn more