Customer case study with Uniworx®, the universal milling cutter for finish machining.
13. January 2026
Uniworx® processes TQ1
Uniworx® processes TQ1
| Variant 1 | Variant 2 | |
| Tool | 08 214 SG | 08 214 SG |
| dc (nominal diameter) | 8 mm | 0.3149 inch | 8 mm | 0.3149 inch |
| Arbor | 20 05 603 | 20 05 603 |
| Indexable insert | 08 835 | 08 835 V R3 |
Technical data | metric sizes
| Variant 1 | Variant 2 | |
| Vc (cutting speed) | 201 m/min | 251 m/min |
| n (revoltions) | 8000 1/min | 10000 1/min |
| fz (feed per tooth) | 0,2 mm | 0,2 mm |
| Vf (feed rate) | 3200 mm/min | 4000 mm/min |
| ap (depth of cut) | 0,05 mm | 0,05 mm |
| ae (width of cut) | 0,1 mm | 0,05 mm |
| Processing time | 1407 Min | 1188 Min |
Technical data | imperial sizes
| Variant 1 | Variant 2 | |
| SFM (surface feet per minute) | 659.45 feet/min | 823.5 feet/min |
| n (revoltions) | 8000 1/min | 10000 1/min |
| IPT (inches per tooth) | 0.0079 inch | 0.0079 inch |
| IPM (inches per minute) | 125.9843 inch/min | 157.48 inch/min |
| DOC (depth of cut) | 0.002 inch | 0.0019 inch |
| WOC (width of cut) | 0.004 inch | 0.0019 inch |
| Processing time | 1407 Min | 1188 Min |
