Pokolm's round insert cutters are universal tools for a wide range of applications.
20. October 2026
Round insert cutter processes materials P
Steel
Processing task in 1.2714 QT
| Tool | 12 200 M6 |
| dc (nominal diameter) | 12 mm | 0.4724 inch |
| Cooling | with air |
| Indexable insert | 01 07 8235 |
Technical data | metric sizes
| Vc (cutting speed) | 230 m/min |
| n (revolutions) | 6101 1/min |
| fz (feed per tooth) | 0,214 mm |
| Vf (feed rate) | 2613 mm/min |
| ap (depth of cut) | 0,25 mm |
| ae (width of cut) | 100 % |
Technical data | imperial sizes
| SFM (surface feet per minute) | 754.6 feet/min |
| RPM (revolutions) | 6101 1/min |
| IPT (inches per tooth) | 0.0084 inch |
| IPM (inches per minute) | 2613 inch/min |
| DOC (depth of cut) | 0.0098 inch |
| WOC (width of cut) | 100 % |
Processing task in 1.7140
| Tool | 66 300/7 VD |
| dc (nominal diameter) | 66 mm | 2.5984 inch |
| Cooling | with air |
| Indexable insert | 04 16 8242 |
Technical data | metric sizes
| Vc (cutting speed) | 156 m/min |
| n (revolutions) | 753 1/min |
| fz (feed per tooth) | 0,8 mm |
| Vf (feed rate) | 3012 mm/min |
| ap (depth of cut) | 3 mm |
| ae (width of cut) | 48 mm |
Technical data | imperial sizes
| SFM (surface feet per minute) | 511.8 ft/min |
| RPM (revolutions) | 753 1/min |
| IPT (inches per tooth) | 0.0315 inch |
| IPM (inches per minute) | 118.58 inch/min |
| DOC (depth of cut) | 0.118 inch |
| WOC (width of cut) | 1.8898 inch |
