10. November 2026

Hands-On Project Day for a Technical School Class

The result is a miniature model of the TechCenter
  • News
  • Event

Milling a building of their choice as a scale model is anything but routine for aspiring machinists. A vocational school class from the Carl-Miele-Berufskolleg for Technology in Gütersloh, Germany, had exactly this opportunity when they visited the Pokolm TechCenter as part of a hands-on field trip. There, the students not only gained a realistic insight into the practical use of CAM software and CNC machines, but also got to try their hand at it themselves.

Working together with our application engineer, the class developed a true-to-scale model of the TechCenter building – from the initial idea to the finished milled aluminum component. 

Afterward, the students were able to work in groups to design and mill their very own building models.

The Task

Miniature Model of the TechCenter

A model of the two-part TechCenter building – featuring a flat roof, window facades, a canopy, and outdoor facilities – was carved from a solid block of aluminum, complete with small details such as a tree and marked parking spaces. It was machined on a Hermle C600U.

You agree that cookies will be set and that your personal data will be processed by Youtube. You can find more information on this in our cookie settings and in our privacy policy.

Accept

First Setup: Creating Volume, Defining Contours

The initial setup focused on exposing the main volume of the structure. A Slotworx® size M was used for roughing the surfaces and finishing the flat surfaces.

For the open pockets and the finer corner edges, a solid carbide end mill was then used to add further detail. As a result, the basic shape of the first building section emerged from the blank after only about an hour of machining time.


Metric sizes

Tool

Strategy

Vc (m/min)

fz (mm)

ae (mm)

ap (mm)

Revolutions (N)

Vf (mm/min)

Slotworx®,  4 32 267Roughing (Contour-parallel, 0,3 mm allowance)4500,527,01,04.4768.952
Slotworx®,  4 32 267Finishing flat surface (parallel to axis)4500,1527,00,34.4762.686
Solid carbide end mill NX06, 163934Roughing open pockets / finishing corner edge1200,176,04,04.7751.623


Imperial sizes

Tool

Strategy

SFM
(ft/min)

IPT (in)

WOC (in)

DOC (in)

Revolutions (N)

IPM (in/min)

Slotworx®,  4 32 267Roughing (Contour-parallel, 0.012 in allowance)1,476.40.021.060.044,476352.4
Slotworx®,  4 32 267Finishing flat surface (parallel to axis)1,476.40.0061.060.0124,476105.8
Solid carbide end mill NX06, 163934Roughing open pockets / finishing corner edge393.700.0070.240.164,77563.9

Second Setup: Facades, Details, and Finishing Touches

After the tool change, the more challenging part followed: the second setup with significantly more complex geometry. 

Vworx and Slotworx® HP handled the roughing of the flat surfaces, before solid carbide ball nose and end mills removed the remaining material in several steps, finished the facade surfaces, and carved out even the smallest details, such as the tree in front of the building or the parking lot markings. 

A total of eleven different tools were used in this setup. This is a good example of just how much coordination even a small demo part requires.

Metric sizes

Tool

Strategy

Vc (m/min)

fz (mm)

ae (mm)

ap (mm)

Revolutions (N)

Vf (mm/min)

Vworx, 20 261Roughing (concentric, 0,3 mm allowance)4500,516,00,57.1627.162
Slotworx® HP, 2 10 266 M6Roughing (concentric, 0,3 mm allowance)3000,358,00,259.5496.685
Solid carbide ball nose mill NV02, 163104Roughing rest material / Finishing tree2640,030,50,214.000840
Solid carbide ball nose mill PV03, 162982Roughing rest material1760,030,50,214.000840
Slotworx® M, 2 20 267Finishing plan surfaces4500,21515,00,17.1623.080
Solid carbide end mill NH09, 164011Plan surfaces + finishing Contour1300,056,05,04.138828
Slotworx® VF, VF09-016-E08-02-R+Plan surfaces + finishing Contour5000,112,00,39.9471.989
Solid carbide ball nose mill NV02, 163092Finishing angled surfaces1760,030,30,214.000840
Solid carbide ball nose mill PV03, 162982Finishing rest material1760,030,30,214.000840
Solid carbide end mill NH02, 163983Finishing rest material1760,020,14,014.000840
Solid carbide end mill NV02, 163052Mark parking spaces660,020,10,114.000840


Imperial sizes

Tool

Strategy

SFM
(ft/min)

IPT (in)

WOC (in)

DOC (in)

Revolutions (N)

IPM (in/min)

Vworx, 20 261Roughing (concentric, 0.012 in allowance)1,476.40.020.630.027,162282
Slotworx® HP, 2 10 266 M6Roughing (concentric, 0.012 in allowance)984.30.010.320.019,549263.2
Solid carbide ball nose mill NV02, 163104Roughing rest material / Finishing tree866.10.00120.020.00814,00033.07
Solid carbide ball nose mill PV03, 162982Roughing rest material577.40.00120.020.00814,00033.07
Slotworx® M, 2 20 267Finishing plan surfaces1,476.40.00850.60.0047,162121.26
Solid carbide end mill NH09, 164011Plan surfaces + finishing Contour426.50.0020.240.204,13832.6
Slotworx® VF, VF09-016-E08-02-R+Plan surfaces + finishing Contour1,640.40.0040.50.0129,94778.31
Solid carbide ball nose mill NV02, 163092Finishing angled surfaces577.40.00120.0120.00814,00033.07
Solid carbide ball nose mill PV03, 162982Finishing rest material577.40.00120.0120.00814,00033.07
Solid carbide end mill NH02, 163983Finishing rest material577.40.00080.0040.1614,00033.07
Solid carbide end mill NV02, 163052Mark parking spaces216.50.00080.0040.00414,00033.07

School Project

The Students’ Own Building Models

In addition to the TechCenter model, the class had a second assignment: Working in small groups, the students were to design their own small building and bring it to life on their own – from the initial design concept to the finished NC programming. The results show just how varied the approaches were and how much creativity went into the designs.

The TechCenter as a Think Tank

The Pokolm TechCenter sees itself as a think tank for our successful customers from around the world. It brings together tools, milling strategies, machines, and application expertise – whether for major customers in the aerospace industry or for talented young professionals.

Read more about the work at our TechCenter and current project examples in our blog post.

Would you like to experience the Pokolm TechCenter with your class or your company?

Whether you’re a vocational school, an apprenticeship provider, or a company with your own manufacturing project, our application engineers look forward to working with you to develop practical solutions. Simply get in touch with our service team.