Customer case study with Slotworx®, the high-performance talent for roughing operations.
1. July 2025
Slotworx® HP processes materials H
Hard materials
Processing task in 1.2738 HH
| Tool | HP06-035-E16-05 |
| dc (nominal diameter) | 35 mm | 1.3780 inch |
| Indexable insert | HP06-8052-HF-RP |
| Coating | PATG |
| Cooling | dry |
Technical data | metric sizes
| Vc (cutting speed) | 176 m/min |
| n (revoltions) | 1600 1/min |
| fz (feed per tooth) | 0,938 mm |
| Vf (feed rate) | 7500 mm/min |
| ap (depth of cut) | 0,6 mm |
| ae (width of cut) | 22 - 35 mm |
| service life | > 150 min |
Technical data | imperial sizes
| SFM (surface feet per minute) | 577.428 feet/min |
| RPM (revoltions) | 1600 1/min |
| IPT (inches per tooth) | 0.0369 inch |
| IPM (inches per minute) | 295.2756 inch/min |
| DOC (depth of cut) | 0.0236 inch |
| WOC (width of cut) | 0.8661 - 1.3779 inch |
| service life | > 150 min |
Processing task in 1.2344, 52 HRC
| Tool | 4 16 266 |
| dc (nominal diameter) | 16 mm | 0.6299 inch |
| Indexable insert | 02 66 835 R20 |
| Coating | PVTi |
| Cooling | with air |
Technical data | metric sizes
| Vc (cutting speed) | 140 m/min |
| n (revoltions) | 2700 1/min |
| fz (feed per tooth) | 0,46 mm |
| Vf (feed rate) | 5000 mm/min |
| ap (depth of cut) | 0,3 mm |
| ae (width of cut) | to 16 mm |
| service life | > 110 min |
| service length | > 550 m |
Technical data | imperial sizes
| SFM (surface feet per minute) | 459.318 feet/min |
| RPM (revoltions) | 2700 1/min |
| IPT (inches per tooth) | 0.0181 inch |
| IPM (inches per minute) | 196.8504 inch/min |
| DOC (depth of cut) | 0.0118 inch |
| WOC (width of cut) | to 0.6299 inch |
| service life | > 110 min |
| service length | > 1804.46 feet |
