13. January 2026

Uniworx® processes materials H

Hard materials
  • Customer case studies
  • Milling cutter bodies
  • Uniworx®
  • Hard materials
Uniworx, the Universal milling cutter for finish machining, processes hardened materials.

Customer case study with Uniworx®, the universal milling cutter for finish machining.

Processing task in 1.2379 56HRC

Tool12 214 M6
dc (nominal diameter)12 mm | 0.4724 inch
ArborHSK63
Coolingwith air
Indexable insert12 836 V

Technical data | metric sizes

Vc (cutting speed)100 m/min
n (revoltions)2450 1/min
fz (feed per tooth)0,1 mm
Vf (feed rate)490 mm/min
ap (depth of cut)0,2 mm
ae (width of cut)0,2 mm

Technical data | imperial sizes

SFM (surface feet per minute)328.084 feet/min
n (revoltions)2450 1/min
IPT (inches per tooth)0.0039 inch
IPM (inches per minute)19.2913 inch/min
DOC (depth of cut)0.0079 inch
WOC (width of cut)0.0079 inch

Processing task in GGG70

 58HRC65HRC
Tool16 214 SG16 214 SG
dc (nominal diameter)16 mm | 0.6299 inch16 mm | 0.6299 inch
Arbor50 16 A63 + 25 10 60325 10 603
CoolingdryMinimum quantity lubrication system
Indexable insert16 093 V R716 093 V R7

Technical data | metric sizes

 58HRC65HRC
Vc (cutting speed)603 m/min1100 m/min
n (revoltions)12000 1/min22000 1/min
fz (feed per tooth)0,2 mm0,34 mm
Vf (feed rate)4800 mm/min15000 mm/min
ap (depth of cut)0,2 mm0,3 mm
ae (width of cut)0,3 mm0,3 mm
Processing time1080 Min180 Min
End of tool lifenot achievednot achieved

Technical data | imperial sizes

 58HRC65HRC
SFM (surface feet per minute)1978.35 feet/min3608.924 feet/min
n (revoltions)12000 1/min22000 1/min
IPT (inches per tooth)0.0079 inch0.0134 inch
IPM (inches per minute) inch/min inch/min
DOC (depth of cut)0.0079 inch0.0118 inch
WOC (width of cut)0.0118 inch0.0118 inch
Processing time1080 Min180 Min
End of tool lifenot achievednot achieved

Learn more