Customer case study with Uniworx®, the universal milling cutter for finish machining.
13. January 2026
Uniworx® processes materials M
Stainless steel
Processing task in 1.4435
| Tool | 20 214 SG |
| dc (nominal diameter) | 20 mm | 65.6168 inch |
| Arbor | 125 12 603 |
| Cooling | with water |
| Indexable insert | 20 835V |
Technical data | metric sizes
| Vc (cutting speed) | 503 m/min |
| n (revoltions) | 8000 1/min |
| fz (feed per tooth) | 0,038 mm |
| Vf (feed rate) | 600 mm/min |
| ap (depth of cut) | 0,1 mm |
| ae (width of cut) | 0,1 mm |
| cutting volume | 0,01 cm3/min |
Technical data | imperial sizes
| SFM (surface feet per minute) | 1650.26 feet/min |
| n (revoltions) | 8000 1/min |
| IPT (inches per tooth) | 0.0015 inch |
| IPM (inches per minute) | 23.622 inch/min |
| DOC (depth of cut) | 0.0039 inch |
| WOC (width of cut) | 0.0039 inch |
| cutting volume | 0.0006 inch3/min |
Processing task in 1.4571 (X6CrNiMoTi17-12-2)
| Tool | 08 214 SG |
| dc (nominal diameter) | 8 mm | 0.3149 inch |
| Arbor | 50 12 A63 S |
| Cooling | with air |
| Indexable insert | 08 092 V R3 |
Technical data | metric sizes
| Vc (cutting speed) | 400 m/min |
| n (revoltions) | 16000 1/min |
| fz (feed per tooth) | 0,2 mm |
| Vf (feed rate) | 6400 mm/min |
| ap (depth of cut) | 0,05 mm |
| ae (width of cut) | 0,05 mm |
| Service life | 2790 Min |
Technical data | imperial sizes
| SFM (surface feet per minute) | 1312.34 feet/min |
| n (revoltions) | 16000 1/min |
| IPT (inches per tooth) | 0.0078 inch |
| IPM (inches per minute) | 251.9685 inch/min |
| DOC (depth of cut) | 0.0019 inch |
| WOC (width of cut) | 0.0019 inch |
| Service life | 2790 Min |
