Milling instead of grinding – smooth surfaces with maximum economic efficiency
9. September 2025
Mirroworx® processes materials P
Steel
Processing task in 1.2063 - NC6
| Tool | 2 100 384 |
| dc (nominal diameter) | 100 mm | 3.9370 inch |
| Arbor | 100 32 710 |
| Overhang | 153 mm | 6.0236 inch |
| Cooling | with cooling lubricant |
| Indexable insert | 04 84 835 |
Technical data | metric sizes
| Vc (cutting speed) | 600 m/min |
| n (revolutions) | 1910 1/min |
| fz (feed per tooth) | 0,5 mm |
| Vf (feed rate) | 1515 mm/min |
| ap (depth of cut) | 0,05 mm |
| ae (width of cut) | 80 - 100 % |
| Ra (average roughnes value) | 0,041 µm |
| Rz (average surface roughness) | 0,25 µm |
Technical data | imperial sizes
| SFM (surface feet per minute) | 1968.5 feet/min |
| RPM (revolutions) | 1910 RPM |
| IPT (inches per tooth) | 0.0197 inch |
| IPM (inches per minute) | 59.6457 inch/min |
| DOC (depth of cut) | 0.0019 inch |
| WOC (width of cut) | 80 - 100 % |
| Ra (average roughnes value) | 1.6142 µin |
| Rz (average surface roughness) | 9.8425 µin |
Processing task in Toolox 44
| Tool | 2 80 384 |
| dc (nominal diameter) | 80 mm | 3.1496 inch |
| Arbor | 50 27 710 |
| Overhang | 100 mm | 3.937 inch |
| Cooling | with cooling lubricant |
| Indexable insert | 04 84 835 |
Technical data | metric sizes
| Vc (cutting speed) | 250 m/min |
| n (revolutions) | 1000 1/min |
| fz (feed per tooth) | 1 mm |
| Vf (feed rate) | 2000 mm/min |
| ap (depth of cut) | 0,03 mm |
| ae (width of cut) | 60 mm |
| Ra (average roughnes value) | 0,03 µm |
| Rz (average surface roughness) | 0,163 µm |
Technical data | imperial sizes
| SFM (surface feet per minute) | 820.21 feet/min |
| RPM (revolutions) | 1000 RPM |
| IPT (inches per tooth) | 0.0394 inch |
| IPM (inches per minute) | 78.7401 inch/min |
| DOC (depth of cut) | 0.0012 inch |
| WOC (width of cut) | 12.3622 inch |
| Ra (average roughness value) | 1.1811 µin |
| Rz (average surface roughness) | 6.4173 µin |
Processing task in 1.2343 (48 HRC)
| Tool | 2 66 384 |
| dc (nominal diameter) | 66 mm | 2.5984 inch |
| Arbor | 50 27 710 |
| Overhang | 100 mm | 3.937 inch |
| Cooling | with air |
| Indexable insert | 04 84 835 |
Technical data | metric sizes
| Vc (cutting speed) | 211 m/min |
| n (revolutions) | 1017 1/min |
| fz (feed per tooth) | 0,65 mm |
| Vf (feed rate) | 1322 mm/min |
| ap (depth of cut) | 0,05 - 0,075 mm |
| ae (width of cut) | 51,5 mm |
| Rz (average surface roughness) | 2,74 µm |
Technical data | imperial sizes
| SFM (surface feet per minute) | 230.752 feet/min |
| RPM (revolutions) | 1017 RPM |
| IPT (inches per tooth) | 0.0256 inch |
| IPM (inches per minute) | 52.0472 inch/min |
| DOC (depth of cut) | 0.0019 - 0.0030 inch |
| WOC (width of cut) | 2.0276 inch |
| Rz (average surface roughness) | 107.87 µin |
